Login or e-mail Password   

Electrical Rules You Should Know Before Installing A Hot Tub

Our commercial electric service segment is cur rated just for you.
Views: 270 Created 08/29/2017

A hot tub is a pool that contains heated water which can be used for pleasure and hydrotherapy. A hot tub needs water and a constant supply of power to run it. This requires that you need proper electrics done for your hot tub to prevent any form of electrical shock occurring. To do this, you can hire a Burlington electrician to do electric wiring for the hot tub.

Wiring for hot tub is guided by electrical rules just like swimming pools and when doing wiring, you must adhere to those principles. Failure to do so is an offense that is punishable by law. The following are electrical principles an Burlington Electrician should know before installing a hot tub:

Ensure you have installed all electrical properly

The law requires that when you are installing electrical for households, the electrical are designed properly and meets international building safety standards. The installation should protect against thermal and mechanical damage that may arise. This is to ensure that electrical wires are free from electrical shocks that may affect people and property by releasing fire.

Ensure the installation is inspected

The law adds that after installation of a hot tub, have it checked and tested by a competent electrician. This is done to make sure that it meets necessary standards for installation.

When you install a hot tub in your home without having Burlington Electrical Contractor to inspect and test it, you are contravening the law. To follow the law, you need to appoint a professional electrician to help check and test that your hot tub conforms to the set standards. Look for an electrician who is registered near you.

In case you do not get a registered Burlington Electrical Services, contact your local authority in charge of controlling buildings safety first before giving the job to the unregistered electrician. The authority will inspect the work done before signing it off. This process requires that you pay a certain fee.

Get the right specification

You need suitable specifications for your hot tub that meets the electrical standards. You need to consult a professional electrician to help you choose the most appropriate specs for your hot tub. The electrician should check that the hot tub is not sharing power with other appliances in the house.

Use a mains circuit breaker for hot tub

The main breaker circuit should be used for the hot tub. It should also allow extra rush of current when the pump is first started. A professional electrician will help fix the mains breaker circuit on your hot tub. In addition, the hot tub should be shielded against interference from earth faults. This is done to prevent electric shock and dangers from damaged connections.  An electrician can help fix an appropriate current device on the hot tub to protect you and your property from electric shocks.

For exterior cabling, you should use steel armoured cable or a protective ducting which is fitted beneath the ground to protect cables against damage. Your electrician will help determine the length of the cable needed.

If you are not sure of the required electrical guidelines for hot tub, seek advice from a professional Burlington electrician.  

Similar articles


22
comments: 3 | views: 202388
10
comments: 2 | views: 27636
8
comments: 1 | views: 5866
8
comments: 0 | views: 4139
8
comments: 0 | views: 13877
7
comments: 0 | views: 5204
7
comments: 0 | views: 2803
 
Author
Article




No messages


Add your opinion
You must be logged in to write a comment. If you're not a registered member, please register. It takes only few seconds, and you get an access to additional functions .
 


About EIOBA
Articles
Explore
Publish
Community
Statistics
Users online: 184
Registered: 107.587
Comments: 1.491
Articles: 7.152
© 2005-2018 EIOBA group.