Login or e-mail Password   

Key Steps by a Toronto Electrician in Installing a Gas Pool Heater at Home

Electricity is not a luxury but a necessity of life. Our electricians work 24 hours around the clock to make sure you, your family or your business have power when you need it.
Views: 344 Created 10/05/2017

Pool owners who desire to offer best swimming services to the family at the onset of winter can devise ways to warm the water. There are many methods as a pool owner you can use to warm water such as solar, gas etc. You only need to compare their cost, merits and demerits. In all these methods you will settle on, you need a competent person to install the system so as it runs effectively with minimal interruptions. There are many electricians who can do this job but if you seek a qualified Toronto electrician, you will get the best services at an affordable cost.

To install a gas to heat pool water at home, you require the assistance of a qualified toronto electrician to ensure that everything is done properly to mitigate risks that may rise. There are several steps that must be followed to install a gas pool heater at home and they include:

Buy the gas heater- There are many gas options in the market today for you to choose from. You need to determine the size of your pool so as to help you buy the gas heater that is most suitable. If you are not sure of the size of the pool, talk to an cheap electrician toronto to help measure the size of the pool and advise you accordingly.

Choose the place to install the heater- The place where to install the gas heater is key since it determines the cost of installation. In most cases, the place to install the gas heater will depend on the type of the heater; its size and model. This can be obtained from the manufacturer of the gas heater. Your electrician downtown toronto will help to select the best location to install the gas heater.

Plumbing- It is vital to switch off the filter unit before installing the gas heater system.  You electrician will help to cut the pipes into correct sizes and attach it to heater valve inlet from the return valve. These pipes will bring water from the filter to the heater. The Toronto electrician will connect another pipe from the heater outlet valve to the pool water inlet. This will bring warm water from the heater to the pool.

Supply and power- Your system needs supply of power to heat water in the pool. To do this, the emergency electrician toronto will help install these gas lines which will be used to supply power. The Toronto electrician will also install a shut off valve and connect a line pipe from the gas to the inlet of the heater. Another option is to connect the pipe to the heater to the plug. Your Toronto electrician will ensure that the plug is protected against elements that may cause thermal heating and results in damage or accidents.

Testing- Once the gas heater system has been installed properly, you need to test and see if it works properly. Your electrician in Toronto will switch on the pool filter and then the heater to test if it is working or not.

If you need wiring of your gas heater system so as to heat water in the pool, contact a Toronto electrician to help you do the work. The Toronto electrician will ensure that the power supply to your pool is safe and uninterrupted.

 

Similar articles


15
comments: 3 | views: 26550
11
comments: 4 | views: 17331
10
comments: 1 | views: 6528
10
comments: 6 | views: 12458
8
comments: 2 | views: 4923
 
Author
Article

Related topics






No messages


Add your opinion
You must be logged in to write a comment. If you're not a registered member, please register. It takes only few seconds, and you get an access to additional functions .
 


About EIOBA
Articles
Explore
Publish
Community
Statistics
Users online: 147
Registered: 107.587
Comments: 1.493
Articles: 7.191
© 2005-2018 EIOBA group.